Showing posts with label surrey. Show all posts
Showing posts with label surrey. Show all posts

Thursday, 22 August 2019

1970 MASERATI INDY 4200 - JULIEN SUMNER Fine Motor Cars Guildford, Surrey



FEATURED DEALERSHIP

JULIEN SUMNER
Fine Motor Cars
Guildford, Surrey
+44(0) 7788 865700




1970 MASERATI INDY 4200

The Maserati Indy was first shown, unnamed, at the 1968 Turin Salon and then made its official debut at Geneva a year later. Named as many have been before after significant racing victories, in this case, the Indianapolis in both 1939 and 1940....they would have made it three in a row in 1941 had it not been for spark plug problems and a subsequent retirement!

The Indy was the first new Maserati model to appear following its acquisition by Citroen in 1969 and who remained at the helm until its collapse in 1975 when Alejandro De Tamaso stepped in, but that's another story altogether!

The lovely sleek design of the Indy was penned by Alfredo Vignale, who at the time had already designed both the fabulous 3500GT Spyder and Sebring; his brief was simple, to create an elegant and very smooth 2 door coupe, with ample room for 4 adults together with luggage, something most GT's of this era failed to manage.

Both the Maserati Classiche Department in Modena and Maserati's UK Owners Club confirm that this car was dispatched from the factory on 21st June 1970 as a manual INDY 4200 finished in Azzurro Hyperion (Light Blue) with white leather and delivered to Mr Franco Maletti in Modena....pleasingly the Indy remains matching. 

There is little to be discovered of its early history but we understand it was exported to Australia during the late 1970s where it was registered firstly in NSW and then subsequently Queensland before it was restored between 1997 and 2003 by its then-owner Mr David Cobin. His meticulous attention given to detail is evidenced by the three A4 folders full of factory information sheets, handwritten entries of works completed, invoices, hand-drawn wiring diagrams and much more....the owner kept an accumulative cost tally, the final figure was AUS $68,675 something approaching £43,000 back in 2003.

The Indy was purchased and subsequently imported in 2015 by Foskers Ferrari here in the UK who in turn sold it to its current owner, a long-standing client of mine. Mileage has been minimal but certainly not it's upkeep with the majority of works been undertaken via Steve Moody of SMDG plus other Italian marque specialists. With a recent MOT all is now set now for Summer use!

It would be a pleasure to answer any further questions you might have. This lovely Maserati can be inspected at my Guildford showroom - please call me on 07788 865700. 







SELECTED BY:
IDRIS THE SQUIRREL
I'm NUTS ABOUT CLASSICS
Disclaimer:  Whilst Classic Chatter ("we") attempt to make sure that the information contained in this website is accurate and complete, we are aware that some errors and omissions may occur from time to time. We are not able, therefore, to guarantee the accuracy of that information and cannot accept liability for loss or damage arising from misleading information or for any reliance on which you may place on the information contained in this website. We highly recommend that you check the accuracy of the information supplied. If you have any queries with regard to any information on our website, please contact us at  jeff.classicchatter@mail.com





CLASSIC CHATTER
Powered by Dragons

Saturday, 27 October 2018

1997 FERRARI 355 BERLINETTA - Rardley Motors Headley Road, Grayshott, Hindhead, Surrey GU26 6LB

TODAYS FEATURED DEALER

Rardley Motors
Headley Road, Grayshott, Hindhead, Surrey
GU26 6LB
Telephone: 01428 606616     07901 944688
Website: http://www.rardleymotors.com


1997 FERRARI 355 BERLINETTA
Manual/Left Hand Drive

: The car went into production on Friday 14th January 1997 and was completed eight days later on the 22nd January 1997. Finished in Grigio Titanio FQ/3238 with Bordeaux 4481 with Rosso 176 carpets. Additionally the steering wheel was finished in Bordeaux rather black hide (VQ)-now black- and Zona "A" , the upper dashboard finished in the same Bordeaux hide (ZE) Upon completion the car was shipped to the Belgian Ferrari agents Spa Franchorchamps and first registered HYS 437 to Mr. V L of N SPRL of Bruxelles. The car passed into the ownership of a second owner in Belgium Mr. F (?) circa 2005, who apparently did not register it in his name.

The car was discovered by Dorset motor dealer, Mike Hinkling who was particularly attracted to the colour combination and following an inspection by his mechanic, purchased by him. He brought the car the car back to the UK and sold it on to motor dealer Ben Mather of the Mather Collection in Gloucestershire ,who in turn sold it on to another motor dealer Mr Nicholas Dove of Gloucestershire, who had former Bob Houghton technician, Peter Chambers, carry out a full engine out cam belt replacement service and MOT and had the car UK registered to on the 1st December 2015.The Bordeaux steering wheel being replaced along the way for a black item.

The car was sold one month later, to the managing director of a London insurance broker Mr. R H of Essex, following an independent inspection by East Anglian Ferrari agents, Lancasters -who videoed the inspection to an Essex based businessman on the 22nd January 2016 were is joined a 2001 Ferrari 456 M GTA.

The car is complete with its original factory service book complete with eight stamps -six of which were main dealers, handbooks leather wallet and tools.



History: 1994

Unveiled at the 1994 Geneva Motor Show, the F355 Berlinetta quickly became the benchmark in its class. The increased power of the new 5-valve per cylinder V8 was complemented by a truly exceptional chassis, with extremely efficient, electronically controlled suspension.

The synergy between all of these added up to a car that delivered both breathtaking handling and performance and the kind of timeless, elegant Pininfarina lines enthusiasts had come to expect.
The Design
The design of every new Ferrari model is, by definition, heavily influenced by the Marque’s culture and experience combined with innovations developed as a result of both active experimentation and research. The result is a melding of style and engineering that delivers superb performance across the board. In the case of the Pininfarina-designed F355, the fusion of familiar elements with more powerfully innovative ones resulted in a truly unprecedented car that guaranteed the same signature Ferrari emotions as ever. The F355 was a masterful piece of engineering as its 109 hp/litre specific power output attests. The latter value and its impressive torque were achieved by adopting a new five-valve cylinder head. The car’s 3496 cc engine punched out 380 hp. Its blistering performance figures were the result of aerodynamic honing that focused specifically on the underbody.


The Body
The two-seater F355 Berlinetta had an aluminium and steel body. Its styling was moulded around an aerodynamically severe design that included a full-body undertray designed to equalise downforce (Cl) between the two axles. The cabin was designed with both safety and driving pleasure in mind. The seats and trim were Connolly leather. Composite racing seats were also available to order. The chassis was a steel monocoque with a tubular steel rear sub-frame for the engine-suspension assembly. Both front and rear suspension used independent unequal-length wishbones and coil springs over gas-filled telescopic electronic dampers with two settings. The car also has anti-roll bars. The steering was rack and pinion with power-assist and optional mechanical gear. The brakes had self-venting discs and excludable ABS ATE. The 18” wheel rims were magnesium. The mid-rear 3496 cc 90° V8 was longitudinally mounted and punched out 380 hp, giving it a specific power output of 109 hp/l. Distribution was by means of twin overhead cams with five valves per cylinder. The con rods were titanium, while the control unit was the Bosch M5.2. Dry sump lubrication and a six-speed plus reverse mechanical gearbox completed the picture along with a dry single-plate clutch.

Taken from Ferrari's own website


SELECTED BY:
IDRIS THE SQUIRREL
I'M NUTS ABOUT CLASSICS
Disclaimer:  Whilst Classic Chatter ("we") attempt to make sure that the information contained in this website is accurate and complete, we are aware that some errors and omissions may occur from time to time. We are not able, therefore, to guarantee the accuracy of that information and cannot accept liability for loss or damage arising from misleading information or for any reliance on which you may place on the information contained in this website. We highly recommend that you check the accuracy of the information supplied. If you have any queries with regard to any information on our website, please contact us at  jeff.classicchatter@mail.com



CLASSIC CHATTER
Powered by Dragons


Wednesday, 10 October 2018

1968 MAZDA COSMO 110S - FAST CLASSICS Unit 12a, Rudgwick Brickworks, Lynwick St, Rudgwick, Horsham Surrey RH12 3DH

TODAYS FEATURED DEALER
FAST CLASSICS
Unit 12a, Rudgwick Brickworks, Lynwick St, Rudgwick, Horsham 
Surrey RH12 3DH 
Telephone: 01483 338 903     
Website: http://www.fast-classics.com



1968 MAZDA COSMO 110S
Although founded in the 1920s, the company that would become Mazda Motor Corporation did not commence series production of passenger cars until 1960. Only four years later the Japanese firm exhibited its first rotary-engined prototype, having acquired the rights to produce NSU’s Wankel-designed engines. In 1966 Mazda launched its first rotary, the Cosmo L10A, which went into production the following year. Mazda’s flagship model, the Cosmo, was powered by a twin-rotor engine displacing 982cc and producing 110bhp which was enough to endow the pretty two-seater coupé with a top speed of 110mph.
While the Cosmo was a comfortable grand touring car in road-going trim, Mazda was keen to demonstrate its competition capabilities, and at the same time allay any fears about the reliability of their Wankel rotary engine. To this end, the factory entered two cars in the 1968 Marathon de la Route, an 84-hour test of endurance held at Germany’s famed Nürburgring circuit. The Cosmos ran near the front of the field during the entire race, with one retiring in the 82nd hour and the other going on to finish 4th overall behind two works-entered Porsche 911s and a works Lancia Fulvia 1.3 HF. 
Production was limited, and when the Cosmo was phased out in 1972 only 1,519 had been made, of which 1,176 were the Series II L10B version. In the world of collectible Japanese cars, the Mazda Cosmo ranks in the top tier, alongside its high-performance Toyota and Nissan competitors, the 2000GT and the Skyline GT-R

EQUIPMENT
Series 1.5, RHD, Hub caps, Trim rings, Wing mirrors, Power antenna, Sony cassette stereo under dash, Rear parcel shelf speakers.

EXTERIOR

This fabulous little sports coupe appears as if on the move standing still, with a dynamic pair of swage lines and grille slats framed perfectly by distinctive chrome fixings front and rear. Having been treated to a full respray in January of this year the car presents in charming custom orange – a suitably period colour that comprehensively accentuates the cars flowing lines.
Bright work has survived very well indeed, framing the windows and screens nicely whilst mirrors and door handles show in excellent order. More recently the front headlight lenses have been replaced and and bumpers re-chromed.

INTERIOR

At only 45.9 inches high the Cosmo requires care upon installation where you are met by a no-nonsense dash; a cockpit affair with toggles for wiper speed and the electric radio antenna. To the left of the speedo and tach are an amp gauge, fuel gauge, clock and an innovative map light; a rotating eye that illuminates things nicely. The vinyl dashboard remains tight and clean whilst gearbox tunnel and door cards retain good texture and show tidily with a rich patina. An under dash radio / cassette leaves entertainment to the passenger whilst the Pioneer radio speakers on the parcel shelf are thought to be original. A refurbished Nardi wheel and original wooden gear knob offer something softer and more elegant in an otherwise plain cabin.
The contrasting houndstooth and vinyl seats appear to have survived well and maintain good support and integrity.

ENGINE & TRANSMISSION

The Series I/L10A Cosmo was powered by a 0810 two-rotor engine with 982 cc and produced about 110 hp (thus the 110 name). It used a Hitachi 4-barrel carburetor and an odd ignition design – two spark plugs per chamber with dual distributors. The aural drama of a wankel rotary is extraordinary; a unique blend of high pitched scream and jet-engined thrust that accompanies the keen performance.
Having been subject to a recent oil change the car runs smoothly and is enjoyable out on the open road.

WHEELS, TYRES & BRAKES

The clean design of the 14 inch steel wheels is illuminated by an alluring chrome lip and hub cap arrangement – unmarked and free of pitting or corrosion wrapped in period GT special rubber.
The brakes have had some recent attention and pull the car up smoothly with no adverse pitch or pull.

HISTORY FILE

Having been built in 1968, this Cosmo was caught in the mid-model update making it a very rare “Series Middle” comprised of a Series I short wheelbase chassis and running gear but adorned with the updated cosmetic features such as the larger air dam of the Series II.
As the world’s first production Wankel rotary-powered car, and one of only 343 Series 1 examples, the Cosmo stands as quite a unique prospect.
The car is supplied having recently been imported with all taxes paid and UK registered.

SOURCE: http://www.fast-classics.com/cars/mazda-cosmo-110-s-for-sale/


SELECTED BY:
IDRIS THE SQUIRREL
I'M NUTS ABOUT CLASSICS
Disclaimer:  Whilst Classic Chatter ("we") attempt to make sure that the information contained in this website is accurate and complete, we are aware that some errors and omissions may occur from time to time. We are not able, therefore, to guarantee the accuracy of that information and cannot accept liability for loss or damage arising from misleading information or for any reliance on which you may place on the information contained in this website. We highly recommend that you check the accuracy of the  information supplied. If you have any queries with regard to any information on our website, please contact us at  jeff.classicchatter@mail.com


CLASSIC CHATTER
Powered by Dragons